10 best micro servos in 2022

Are you looking for the best micro servos? Based on expert reviews, we ranked them. We’ve listed our top-ranked picks, including the top-selling micro servos Having trouble finding a great micro servos? This problem is well understood by us because we have gone through the entire micro servos research process ourselves, which is why we have put together a comprehensive list of the best micro servos available in the market today. After hours of searching, we have found the best micro servos for 2022. See our ranking below!

10 best micro servos in 2022

Bestseller No. 1
12PCS SG90 Micro Servo Motor, Dorhea Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control Compatible with Ardu ino
  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
  • It is tiny and lightweight with high output power.
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
  • Support Arduino,Futaba, JR, Sanwa and Hitec remote system.
Bestseller No. 2
4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
  • High quality and high cost performance.
  • Operating speed: 0.1second/ 60degree ( 4.8V no load)
  • Operating voltage: 4.8-6V
  • Small size and light weight.
  • Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
SaleBestseller No. 3
Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable, Mini Servos for Arduino Project
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 microseconds
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
  • Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
Bestseller No. 4
Adeept AD002 4 Pcs MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project
  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor.
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction.
  • 【Angle】Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180.
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi.
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots.
Bestseller No. 5
FLASH HOBBY 1 Pair Servo Micro Analog 1.5g GS1502 Loading Two Linear Servo
  • Model: GS-1502 digital
  • Torque: 0.08kg-cm
  • Speed: 0.12sec/60° at 3.7V
  • singal: 900-2100uS,frequency: 50-330Hz Motor: Coreless Motor
  • Package Contents: 1 Pair Micro Analog Servo
Bestseller No. 6
Seamuing 6Pcs MG90S Micro Servo 9G Servo Motor Metal Geared Micro Servo Motor 9G Smart Robot Car Helicopter Plane Boat
  • MG90S micro servo motor, updated SG90 serve motor.
  • Metal Gear with less noise
  • Stall Torque: 2.0kg/cm(4.8V)
  • Operating Speed: 0.11 seconds / 60 degrees (4.8V)
  • Structural Material: Aluminum metal teeth, coreless motor, double ball bearin
Bestseller No. 7
YoungRC Micro 3.7g Servo GH-S37D Mini Digital Servo for Control Aeromodelling Aircraft Flight Direction RC Plane Helicopter Boat Car 5pcs
  • ▲ Use for rc plane, helicopter, boat, car, etc.
  • ▲ The 3.7g servo is coreless, gear precision, high torque and low noise.
  • ▲ Made of all nylon gear, durable for used,long service time.
  • ▲ Connector wire length up to 150mm, convenient to use.
  • ▲ Package Included: 5 pieces 3.7g micro servo.
Bestseller No. 8
AGFrc Sub-Micro Servo Motor - Upgrade Metal Case Titanium Geared 13g 3.8kg Mini Servo for 1/14 1/18 1/24 RC Cars RC Planes
  • ~ AGFrc 13g Metal Case Titanium Gear Sub-Micro Servo
  • ~ Operating speed: 0.15ec/60° @ 4.8V ,0.13sec/60° @ 6.0V,
  • ~ Stall Torque: 3.0kg.cm(41.66 oz-in) @ 4.8V ,3.8kg.cm (52.77 oz-in) @ 6.0V
  • ~ Operating Voltage: 4.8-6.0V , Size: 22.8*12*29.4mm(0.90 x 0.47 x 1.16 in)
  • ~ Ideal for 1/14 1/18 1/24 RC Car, Airplane, Helicopter, Robot
Bestseller No. 9
Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with Ardu ino RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control
  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
  • Mini servo SG90 is tiny and lightweight with high output power.
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system.
Bestseller No. 10
Miuzei 10 pcs SG90 Servo Motor, Micro Servo 9G SG90 Kit for RC Robot Arm/Walking Helicopter Airplane Car Boat Control, Micro Servos for Arduino Project
  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments;
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V;
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm); Dead band width: 7usec; Amplifier Type: Analog Controller; Operating Voltage: 4.8V~6.0V;
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally;
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation
Bestseller No. 11
RGBZONE 4Pcs ES08MA II 12g Mini Metal Gear Analog Servo Shockproof Stable Machine Compatible for RC Model
  • Made of high-quality materials, very wear-resistant, light weight, can not be easily damaged
  • Mini metal gears, can be shockproof, low noise, stable performance
  • Operating voltage: 4.8V-6.0V; Dimensions: 24mm*23mm*11.5 mm (0.94 x0.9 x.0.45 inches); Working speed: 0.12/0.10sec/60degree
  • We provide you with 4PCS ES08MA II, please confirm before purchase, this is not the original brand
  • Application Scope: Helicopters KT, fluttering, gliding, small robots, and other models
Bestseller No. 12
2PCS AGFRC Micro Servo 9g Servo Motor Kit - Digital 11g Metal Gear Mini Servo for RC Helicopter Airplane Boat Controls, Control Angle 180°
  • ▶High precision metal gears Micro Servo
  • ▶Ideal for robot Plane Helicopter Boat Car
  • ▶Ultra Light 11g, Size 23*12.1*23.8mm
  • ▶Stall Torque: 2.2kg.cm @ 4.8V,2.8kg.cm @ 6.0V
  • ▶Genuine AGF Brand package. Any question please contact us at first time
Bestseller No. 13
Savox SH-0257MG Super Speed Metal Gear Micro Digital Servo
  • Dimensions(mm): 22.8X12.0X25.4, Weight(g): 14.0
  • Speed(@4.8/6.0V sec/60): .13/.09
  • Torque(@4.8/6.0V oz-in): 25.0/30.6
  • Gear: Metal, Bearing: 1BB, Case: Aluminum, 21 Tooth Spline
  • 1 Year Warranty Against Manufacturing Defect
Bestseller No. 14
Miuzei 5 Pcs SG90 Servo Motor, Micro Servo 9G Mini Servo Motor for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable Compatible with Arduino
  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments
  • Interface Type: compatible with JR & Futaba interface.
  • No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).Dead band width: 7usec
  • Amplifier type:Analog controller Operating voltage: 4.8V~6.0V
Bestseller No. 15
Maxmoral 2pcs MG90S 9g Metal Gear Micro Tower Pro Servo Upgraded SG90 Digital Micro Servos for RC Vehicle Helicopter Boat Car Models
  • Type: 2pcs MG90S Full Metal Gear Mini Micro Servo, Product Size: 22.8x12.2x28.5mm, Product Weight: 13.6g
  • Operating Torque: 2.0KG/cm, Response Speed: 0.11s/60 Degree, Rotation Angle: Max 90 Degree, Working Voltage: 4.8V, Dead Band Width: 5 microseconds
  • Wiring: Dark Gray: GND, Red: VCC 4.8-7.2V, Orange: Pulse Input, Interface Type: JR / FUTABA General
  • Structure: Consist of Copper metal teeth, coreless motor, double ball bearing. Attached Accessories: Multi-arms, 30cm wire, fixing screws
  • Application Range: 450 E-sky, swash plate servo, fixed wing, helicopters KT, fluttering, gliding, small robots, and other models of Mini Car, Mini Ship, Helicopter and Airplane.
Bestseller No. 16
Spektrum SX107 Micro Analog Metal Gear Surface Servo, SPMSSX107, Black
  • Item Package Dimension:10.16 Inches L X5.08 Inches W X1.52 Inches H
  • Item Package Weight:0.2 Pounds
  • Product Type:Toys And Games
  • Country Of Origin: China
Bestseller No. 17
MG90S 9g Servo Motor Micro Metal Gear for Robot Car Plane RC Helicopter Arduino
  • MG90S Micro Servo Motor, updated SG90 serve motor.
  • Stall Torque: 2.0kg/cm(4.8V)
  • Operating Speed: 0.11 seconds / 60 degrees (4.8V)
  • Metal Gear with less noise
  • Structural Material: Aluminum metal teeth, coreless motor, double ball bearin
Bestseller No. 18
Ybee 10x Pcs SG90 Micro Servo Motor Mini SG90 9g Servo for RC Helicopter Airplane Car Boat Robot Controls
  • Operating speed: 0.12second/ 60degree ( 4.8V no load)
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm)
  • Operating voltage: 3.0V~7.2V
  • Temperature range: -30 to +60
  • Dead band width: 7usec
SaleBestseller No. 19
1 Pair Digital Ultra Micro 1.5g Linear Servo Tiny for Aircraft Servo Tester
  • Large Torque: maximum torque is up to 0.24 kg/cm (3.33 oz/in)
  • Light weight: only 1.5g
  • Speed sensitive: 0.15sec.cm
  • Package Includes:2 X Tiny 1.5g Servo
Bestseller No. 20
AGFRC Digital High-Torque Micro Wing-Servo - CNC Thin Servo with Dual Ball Bearing & Metal Gear (A20CLS)
  • Weight 20g, Size: 23*12*27.5mm (0.90 x 0.47 x 1.08 in)
  • Full CNC aluminium hulls and structure
  • High performance Digital mini servo , High precision metal gears
  • Stall Torque: 5.0 kg-cm (69.44 oz-in) @ 4.8V , 5.8 kg-cm (80.55 oz-in) @ 6.0V
  • Ideal for airplane and 450 class helicopter tail and swashplate

How to choose the best micro servos

1. Price

The price of the micro servos can vary significantly depending on the seller and product. For some, shipping costs are a much higher priority than others; for other items there may be taxes that need to factor into your purchase decision as well! When buying from Amazon they offer great combo deals which makes finding exactly what you want easier by allowing multiple sellers with varying prices appear in one list so we recommend browsing through them all before settling down with just any old deal or spending more money upfront when possible since these websites always have something interesting going forward at least

2. Brand

Choosing the best micro servos is not as easy and straightforward decision. You will have to consider the brand, which can make a difference between durability or efficiency depending on what you need from your product in terms of quality for example higher priced brands might be more efficient but lack certain features that lower end machines offer such us pressure washing ability.

3. Function

The question “why am I buying this product?” can help you decide whether it’s worth investing in. If your answer is only for one-time use, then there may not be as much value compared with something that will last longer and serve me better.

4. Old Customer Review

To determine if the product you want to buy has been reviewed by previous buyers, go through its reviews section. If there are many positive feedbacks about your prospective purchase then it’s most likely a good quality item; however one or two unhappy customers against hundreds of satisfied ones can’t necessarily mean that this particular sellers’ items aren’t worth buying from them!

5. Pros and Cons of product

Before you buy any product, it’s important that you know the good and bad points of this item. There may be other reviews online or people who have used micro servos before can give their opinion on social media so make sure to check both with an open mind in order get a feel for what kind of experience they had using those items as well!

6. Service

It is important to consider how long you plan on using micro servos. You need to know if the product description says that it will last for X amount of time and check whether this period meets your needs or not because sometimes cheaper products don’t always mean better quality!

7. Warranty

Lastly, if you want the peace of mind that comes with the best micro servos then get one. Not only does it offer protection against any damages during shipping but also means they will take responsibility for sending out replacement products in case yours gets faulty or broken upon delivery!

Leave a Comment

Your email address will not be published. Required fields are marked *